Information ARDEX WPM 002
A rapid drying, two part waterproofing membrane specially designed for use under tiles.
- Advanced acrylic polymers – will not re-emulsify
- Rapid drying time, normally ready to tile in 16-24 hours
- Class III two component cementitious membrane that conforms to AS4858:2004 Wet Area Membrane (Ref: CSIRO Report 3879)
- Compatible with ARDEX tile adhesives
- Fibre reinforced – no need for reinforcing mat
- Low VOC content – meets Green Building Council of Australia Green Star IEQ-13 requirements
- Concrete, renders and screeds
- Wet area compatible fibre-cement sheet, plywood and plasterboard
Substrates:
- Concrete
- Renders and screeds
- Fibre cement
- Plasterboard
- Plywood
- Particleboard
- Permanent immersion
Technical Data ARDEX WPM 002
Location:
- Internal wet areas, balconies and other areas that will be tiled or protected from regular foot traffic. Suitable for permanent immersion.
Surfaces:
- Floors
- Walls
Colours:
- Liquid – White
- Powder – Off white
Coverage:
- 40kg unit covers approx 16m2 to 24m2 (2 coats)
- Floors 16m2 (2 coats) D.F.T. – 1.2mm
- Walls 24m2 (2 coats) D.F.T. – 0.8mm
Drying Times:
- Recoat time: 1-2 hrs
- Ready to tile: 16-24 hrs
- Full cure: 3 days
Pack Size:
- 20kg liquid / 20kg powder
VOC content:
- 25g/L
