Key Features:
- Dissolves ground in dirt from textured surfaces
- Removes factory applied waxes and floor finishes
- NanoScrub® is non-acidic and non-flammable
- Breakthrough NanoSTG™ technology
For use on:
As a cleaner for porcelain tiles, ceramic, polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine), grout, quarry, saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone, tile and grout surfaces.
Limitations:
Do not allow product to come in contact with any non-recommended surface, including (but not limited to) onyx and soft limestone.
Application of Product:
USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.
Read entire label before using. SHAKE WELL BEFORE USING. Sweep, vacuum, or dust surface to remove any loose debris. Pre-wet surface with a liberal amount of water. Apply NanoScrub® directly to the wet surface. Agitate with a white nylon pad, scrub brush or scrub machine. Mop or wet vacuum up residue. Rinse thoroughly with clean water. NanoScrub® can be used as a power booster with any Aqua Mix® cleaner or problem solver, mixed according to directions. Apply chosen product to surface, add NanoScrub® and agitate mixture. Continue to follow directions on the chosen product making sure a clean water rinse is the final step to remove any remaining residue.
Cleaning of equipment:
Clean tools with water before material dries.
Data Sheets:
VOC Content:
Maximum VOCs: 0.6%
pH:
9-10 (alkaline)
Available in:
946ml, 3.8L
