For use on:
As a pre sealer or grout release for all natural stone such as granite, basalt, marble, limestone, sandstone, bluestone, travertine, slate etc. concrete pavers, brick and masonry. For interior and exterior use.
Limitations:
- Not for use as a final top surface sealer
- Do not allow sealer to come in contact with any non-recommended surface
- If product is allowed to dry on surface, a white film may form. If this occurs, scrub with water and a white nylon pad
- ProBlock is not a waterproofing agent
- Not for use on the top surface prior to the application of Enhancing Sealers such as Aqua Mix® Enrich’N’Seal™ or Aqua Mix® Stone Enhancer
Drying Time:
- Sealer should be allowed to cure 48 hours prior to installation.
- When used as a pre-sealer, sealer must cure a minimum of 2 hours prior to grouting.
- Ensure good airflow during the curing process.
- Do NOT allow to get wet during the curing process.
VOC Content:
Maximum VOCs: <5 grams per liter
Available in:
3.8L & 19L
